| |
|
DO'S & DON'TS FOR
SAFE GRINDING |
| |
|
1 |
1.Do
always
HANDLE & STORE
wheels carefully.
|
1 |
1.DON’T
use a wheel that has been
DROPPED.
|
|
2 |
1.Do
THOROUGHLY INSPECT
all wheels before mounting for possible damage.
|
2 |
1.DON’T
FORCE
a wheel on to the machine
OR
ALTER
the hole size.
|
|
3 |
1.Do
CHECK MAX. OPERATING SPEED
mentioned on wheel does not exceed machine speed.
|
3 |
1.DON’T
ever
EXCEED MAX. OPERATING
SPEED
established for the wheel.
2.
|
|
4 |
1.Do
CHECK MOUNTING FLANGES
for equal, correct diameter and surface.
|
4 |
1.DON’T
use mounting flanges with
NOT CLEAN & UNEVEN
surfaces.
|
|
5 |
1.Do
USE MOUNTING BLOTTERS
both sides.
|
5 |
DON’T OVER TIGHTEN
the mounting nut.
|
|
6 |
1.Do
adjust
WORK REST
to correct setting.
|
6 |
1.DON’T
JAM
work into the wheel.
|
|
7 |
1.Do
always
USE A SAFETY GUARD
covering at least one half of the grinding wheel.
|
7 |
1.DON’T
ON
the machine without
FIXING
SAFETY GUARD.
|
|
8 |
1.Do
allow free running of
NEWLY MOUNTED
GRINDING WHEELS
for at least 3 minutes before grinding.
|
8 |
1.DON’T
grind on
SIDE
of the wheel.
USE
PROPERLY DESIGNED
wheel for job.
|
|
9 |
1.Do
WEAR SAFETY GLASSES
for eye protection.
|
9 |
1.DON’T
STAND DIRECTLY IN FRONT OF A GRINDING WHEEL
whenever a grinder is switched on.
|
|
10 |
1.Do
CUT COOLANT SUPPLY
before switching off the grinding machine.
|
10 |
1.DON’T
grind materials for which the wheel is
NOT DESIGNED.
2.
|
| |
|
|
|
|
[
Abrasive Materials ] [
Bonded Abrasives ] [
Coated Abrasives ] [
Diamond & CBN Wheels ] [
Non-Woven Abrasives ] |
